Earbuds have come a long way in recent years. With so many different options on the market, it can be hard to know which pair is right for you.
If you’re looking for a quality pair of wireless earbuds, Skullcandy’s offerings are worth considering. Here’s a look at how to pair them and some of the benefits of using this type of headset.
Pairing the earbuds is easy, even if you’ve never paired Bluetooth devices before. Most modern cell phones can pair with these via Bluetooth within just a few minutes.
It’s important to note that every device is different, so these steps are good guidelines but not specific instructions for your smartphone or another device.
The pairing process for Skullcandy wireless earbuds is pretty straightforward, but it does take a little bit of time to master.
However, once you have them paired, they shouldn’t give you any trouble after that point.
How to pair Skullcandy wireless earbuds?
Here’s what you need to do:
Turn on your phone or other device and open up its settings menu. The exact location will vary depending on the type of device you’re using.
Scroll down to the section that says “Bluetooth settings” or something similar and turn on Bluetooth from here if it isn’t already turned on.
If your device is a newer one, you may find this in a different spot. For example, more recent iPhones will have their Bluetooth settings under “General” rather than “Settings.”
Open up your earbuds’ charging port case and wait for them to power on automatically. This usually takes around 30 seconds but can take two minutes, depending on how much charge they currently have stored away.
You’ll know that they’ve powered on when the LED indicator lights up solid red instead of flashing red.
Once the earbuds are powered on, you’ll need to press the power button on your phone or another device. You may have to hold it down for several seconds, depending on the model of the smartphone.
Your earbuds should flash blue and red when they’re in pairing mode. If this happens, you can release the power button on your device.
Some devices will indicate that it’s trying to connect by displaying a popup with available Bluetooth connections or through notification sounds instead of flashing lights. It varies across different types of devices.
If your phone doesn’t show an available connection after doing all of these steps, you may have to manually put it into pairing mode yourself.
This involves pressing and holding down both buttons until its LED indicator flashes white or red. If this happens, repeat the steps above, starting with step 3.
Once your earbuds are connected successfully, you can check to make sure they’re paired by opening up your phone’s Bluetooth settings screen again.
You should see them listed here even if you don’t have the new connection popup up on-screen.
How to disconnect your Skullcandy Wireless earbuds from a Bluetooth device?
Disconnecting the earbuds from a previously paired device is as easy as powering them off, opening up your phone’s settings menu, and choosing “forget” for the Skullcandy wireless.
How to pair an additional smartphone with the earbuds?
Pairing a second device is possible but will require some extra work on your part. First, you’ll need to manually put the first smartphone into pairing mode by pressing and holding down both buttons until its lights flash white or red.
Once that’s done, unpair it with your phone’s Bluetooth settings screen from this original device. Then, follow all these steps from scratch, starting at step 3.
How to use the earbuds with a home entertainment system?
Pairing the wireless earbuds with your TV or other device is more of an advanced operation than pairing them with a phone, but it’s still possible if you follow these steps closely:
- Put the Skullcandy headphones into pairing mode by pressing and holding down both buttons until their white light flashes. You’ll have between 20 seconds and one minute to go through these steps before the earbuds automatically power off again. If they do prematurely shut down, just repeat this step starting at step 1.
- Press and hold the play/pause button on your TV for three seconds. Your television should then display “Skullcandy” as a Bluetooth device available for pairing.
If it doesn’t, you’ll need to consult your television’s remote control or manual to find out how to manually put it into pairing mode.
How to make the most of the Skullcandy wireless earbuds?
The sound quality from these headphones is pretty midrange-heavy and full, with a strong bass response and clear treble notes.
This makes them better suited to people who want an immersive listening experience above all else rather than folks who prioritize audio balance.
Here are a few frequently asked questions about how to pair Skullcandy wireless earbuds.
How much do they cost?
Skullcandy wireless earbuds typically sell for less than $69 on Amazon. These are pretty mid-level prices and will fit almost any budget if you’re shopping on a budget.
How long do the batteries typically last?
The batteries included in Skullcandy wireless earbuds tend to last for five to six hours per charge.
How heavy are they?
A single pair of these earbuds weigh around two ounces, roughly the same as a set of medium-sized sunglasses.
How long is the warranty?
Skullcandy provides a one-year limited warranty covering manufacturer defects, such as problems with parts and workmanship.
How do I clean my Skullcandy wireless earbuds?
The best way to keep your Skullcandy Wireless earbuds working their best is by occasionally cleaning them with a cloth dampened with warm water containing a small amount of dishwashing soap.
Check this post, if you want to read more about how to clean earbuds without damaging them.
How much background noise do they block out?
They’re not active noise-canceling headphones, but they aren’t entirely open either.